What is 0.75 MM2 in AWG?

What is 0.75 MM2 in AWG?

18
Wire Gauge Size Chart: American Wire Gauge (AWG) to Square Millimeters (MM2)

Wire Size Conversion Chart – American Wire Gauge to square millimeters
AWG mm2
18 0.75
17 1.0
16 1.5

What gauge is 0.75 wire?

20 awg
A Simple Guide on Cable AWG to Metric Conversions

Metric MM2 (Diameter) AWG Approx Strading
0.75mm 20 awg 24/0.2
1mm 18 awg 32/0.2
1.5mm 16 awg 30/0.25
2.5mm 14 awg 50/0.25

What size is AWG in MM2?

Metric AWG to MM2 Conversion Chart

AWG MM2
17 1
16 1.5
14 2.5
12 4

What gauge is 0.8 mm wire?

21
Sheet Steel Gauge Conversion Chart

Gauge No Inch Metric
20 0.036″ 0.9mm
21 0.032″ 0.8mm
22 0.028″ 0.7mm
23 0.024″ 0.6mm

What is AWG #10 in mm2 wire size?

6
AWG to Metric Conversion

AWG Wire Gauge Size Metric Size (mm2 cross-sectional area)
10 6
8 10
6 16
4 25

What is 10 AWG wire in mm?

0.102 2.59
American Wire Gauge (AWG) vs. cross sectional area converter.

American Wire Gauge (#AWG) Diameter (inches) Diameter (mm)
10 0.102 2.59
11 0.0907 2.30
12 0.0808 2.05
13 0.0720 1.83

How do you convert AWG to mm2?

This means for AWG = 1: The metric wire outside diameter is 0.127 * 92(32-1)/39 = 7.348 mm. The metric wire cross-section is 0.012668 mm2 * 92(36-1)/19.5 = 42.409 mm2.

What is 8 AWG in MM?

3.264mm
Wire Gauge Conversion

Wire Number (Gauge) A.W.G. or B&S (Inches) A.W.G. Metric (MM)
7 0.1443″ 3.665mm
8 0.1285″ 3.264mm
9 0.1144″ 2.906mm
10 0.1019″ 2.588mm

What size is 12 AWG in mm?

2.052mm
Wire Gauge Conversion

Wire Number (Gauge) A.W.G. or B&S (Inches) A.W.G. Metric (MM)
12 0.0808″ 2.052mm
13 0.072″ 1.829mm
14 0.0641″ 1.628mm
15 0.0571″ 1.45mm

What size wire is 12 AWG?

12 AWG Wire Diameter (12 Gauge Wire In mm)

12 gauge wire is 2.053 mm thick. This is equal to 0.0808 inches. Because the diameter of 12 AWG wire is so close to 2 milimeter we also refer to it as a ‘2 mm wire’.

What is 20 AWG in mm?

0.8128mm
Wire Gauge Conversion

Wire Number (Gauge) A.W.G. or B&S (Inches) A.W.G. Metric (MM)
18 0.0403″ 1.024mm
19 0.0359″ 0.9119mm
20 0.032″ 0.8128mm
21 0.0285″ 0.7239mm

What size wire is 6 AWG?

Breaking Force for Copper Wire

AWG gauge Conductor Diameter Inches Ohms per 1000 ft.
6 0.162 0.3951
7 0.1443 0.4982
8 0.1285 0.6282
9 0.1144 0.7921

Which is thicker 8 gauge or 10 gauge wire?

What is Wire Gauge? The thickness of a cable or wire is defined by its gauge size. The general rule of thumb is that the smaller the gauge number, the thicker the cable.

What is 20 AWG in MM?

Can 12 AWG handle 30 amps?

Can You Use a 30-Amp Breaker on 12-Gauge Wire? You should not use a 30-amp circuit breaker on a 12-gauge wire. The circuit breaker installed on a circuit is of a specific size to protect a certain wire gauge. A larger breaker on a thinner wire will allow more current over the wire before tripping.

What is 10 AWG in MM?

American Wire Gauge (AWG) vs. cross sectional area converter.

American Wire Gauge (#AWG) Diameter (inches) Diameter (mm)
9 0.114 2.91
10 0.102 2.59
11 0.0907 2.30
12 0.0808 2.05

What is 6 AWG in MM?

” 4.115mm
Wire Gauge Conversion

Wire Number (Gauge) A.W.G. or B&S (Inches) A.W.G. Metric (MM)
6 0.162″ 4.115mm
7 0.1443″ 3.665mm
8 0.1285″ 3.264mm
9 0.1144″ 2.906mm

Which is bigger 6 AWG or 8 AWG?

As you can see, 6 AWG wire is bigger than 8 AWG wire. In the AWG wire size scale, the smaller the AWG number, the thicker the wire.

What is bigger 2 0 or 2 AWG?

More specifically, a wire labeled 2 0 will be thicker than a wire labeled 2 AWG. Also, lower AWG wires typically have higher amps, which is an electrical current’s base unit. For example, a 2 0 copper wire will have up to 200 amps while a 2 AWG copper wire will have up to 125 amps.

What does AWG stand for?

American Wire Gauge
American Wire Gauge (AWG) is the standard way to denote wire size in North America. In AWG, the larger the number, the smaller the wire diameter and thickness. The largest standard size is 0000 AWG, and 40 AWG is the smallest standard size.

What happens if you put a 30 amp breaker on 12 gauge wire?

Can 10 AWG handle 50 amps?

A 10-gauge bare copper wire can carry a 50-amp load, but the resistance in the cable will cause it to heat up substantially. This heat generated by the current causes a problem for insulated cables. The heat causes the insulation to melt, resulting in shortcircuits and potential shock and fire hazards.

Is 12 AWG the same as 12 gauge?

AWG is the wire standard (ie – the way it’s made). The wire gauge simply refers to the sizing of the wire (the thickness). 12 AWG is equivelent in size to 12 gauge wire, but “12 gauge” wire can be a variety of things whereas “12 AWG” is 12 gauge wire made according to the AWG standard.

Is #2 and 2 AWG the same?

Is 4 0 and 4 AWG the same?

So basically you are left with the amount of current that will be needed, e.g. #4 wire is rated for 125amps and 4/0 is rated for 360amps. If you need to have very high current then the 4/0 would be needed if lower current then #4 would be good.

Related Post