What is a CMSP training course?
The California Motorcyclist Safety Program (CMSP) Motorcyclist Training Course (MTC) is designed for the novice rider with no (or limited) street riding experience and is required for those under 21 years old. This course includes both 5-hours of classroom and 10-hours on-cycle instruction.
Do you have to take a motorcycle safety course in California?
The MTC is mandatory for those under the age of 21, but is also recommended to those 21 and older who are seeking to obtain a motorcycle endorsement on their California driver license. The CMSP also offers the Premier Program which is an extended MTC consisting of 7.5-hours of classroom and 13.5-hours of riding.
What does spat mean for motorcycles?
SPAT stands for the steps we came up with: Speed—Position—Aim—Turn. Unlike Slow—Look—Press—Roll, SPAT was a dynamic, cyclical process that repeats itself over and over, just like when we’re riding on the street. Walking through the steps: Speed means we check and adjust our speed.
How many steps are included in the basic cornering procedure?
When you are taking a corner, you can break it down to 3 basic steps, preparing for the turn, leaning and exiting. While this might seem simple, it’s not. There are a ton of factors you need to take into consideration at each stage.
How long is CMSP good for?
DL389s expire 12 months from the original date of issue and will not be reissued once it has expired. Obtaining a reissued DL389 will not extend the expiration date. If it has already expired you will need to take the entire course again to receive a new DL389 certificate.
How long does it take to learn how do you ride a motorcycle?
To learn how to ride a motorcycle takes between three to five days of practice, and to get good at riding a motorcycle takes between one to two years. However, this is a life-long process. Being good at riding a motorcycle is a relatively vague concept, and there are a lot of caveats to it.
Can I ride a 250cc motorcycle on a car licence?
You can ride up to 125cc with a valid CBT certificate. (or a full motorcycle licence category A) A 250cc motorcycle will required a full motorcycle licence.
How important is valve adjustment on motorcycle?
This clearance is important because it compensates for the expansion of the various engine components as the engine heats up, thus allowing optimum engine performance and preventing engine damage.
Why do motorcycles engines need valve adjustments?
The reason valve adjustments are important is because the constant slamming of the valve causes it to recede ever-deeper into the head. Left unchecked, the tip of the valve stem eventually will contact the piece that actuates it, like the cam or rocker.
When should you turn your head for cornering?
So, turn that head and keep looking to the bit of road where you want the bike to end up. When you get a clear view all the way through the corner, that’s when you turn the bike. That’s the point when you transfer pressure from the outside footpeg to the inside one – but there’s much more you can do to turn the bike.
Where do you look when cornering?
In the corner itself, it’s important to look where you want to go, as always (so don’t look at the lonely tree, but follow the line that you want to ride, with your eyes). Always look *far ahead*. Try to pay attention, in a corner, to the way the corner behaves: tightening curves can be very treacherous.
Is it hard to learn to ride a motorcycle?
Learning how to ride a motorcycle is much easier than most people think. Motorcycles aren’t these big, complex machines requiring an expert level of skill to get started. Essentially, they’re just bicycles with engines, and anyone can learn to ride.
Which foot to put down when stopping a motorcycle?
-Which foot to put down when stopping a motorcycle? Put your left foot down. This way your right foot still has control over the rear brake.
What speed should you shift gears on a motorcycle?
5,000 to 7,000 RPMs
Determining when to shift will vary on the bike, road conditions and travel speed. While most bikes are happy shifting at 5,000 to 7,000 RPMs, it is best to judge by the sound and feel of the engine. As you move faster, its pitch will increase. When the pitch is high, it is time to shift.
What year is grandfather rights?
before 1 January 1997 you would automatically also acquire licence categories BE, C1, C1E, D1 and D1E. These additional categories are more commonly known as ‘Acquired Rights’ or ‘Grandfather Rights’.
What motorbike can I ride on a full car licence?
Yes, if you have a full car licence you can ride a 125cc scooter or motorbike off-road. However, you must take and pass your compulsory basic training (CBT) before riding on the road.
What happens if valves are not adjusted?
Too much or too little valve clearance can result in poor performance or a rough idle because the engine can’t “breathe” normally and operate at peak efficiency. Too much clearance means the valves will likely clatter and, over the long term, cause damage to the valves, camshaft lobes or rocker arms.
How do you tell if your valves are out of adjustment?
Common symptoms that your valves are out of adjustment
- Your engine makes loud tapping or clicking noise. One of the common symptoms of valves that are out of adjustment is if your car engine keeps making loud tapping or clicking noise.
- Overheating.
- Increased fuel consumption.
- Pre-ignition issues.
Why do bikers lean sideways when taking a turn?
In short, leaning the bike allows there to be a gravitational torque to balance the torque from the fake force. Leaning prevents you from falling over.
When turning on a motorcycle you should avoid?
Avoid throwing your weight one way or another while the forces acting on your bike cause it to become upright again. This can throw off the stability of your bike and cause an unnecessary accident.
What is the fastest way to get curves on a motorcycle?
Perfect Cornering Posture for the Street and Track Riding – YouTube
Do you need to be strong to ride a motorcycle?
You do not necessarily need to be strong to ride a motorcycle. There are many motorcycles suited for people of all shapes and sizes. The important thing is to make sure you can balance the motorcycle by yourself, mount it without any assistance, and have a firm balance while on the motorcycle.
How should a beginner ride a motorcycle?
How To Ride A Motorcycle (For Beginners) – YouTube
How fast can you go in 2nd gear on a motorcycle?
While the appropriate speed varies based on the situation, the following is a rough estimate of the speed range: First gear is 0 to 9 mph, second gear is 9 to 18 mph, third gear is 18 to 24 mph, fourth gear is 24 to 34 mph, and fifth and sixth gears are 34 mph and above.
Why do you square the handlebars so the motorcycle?
It is important to square the handlebars (center the steering) so the motorcycle is easier to hold up. Be sure not to release the clutch lever until you are ready to move out. Usually, both brakes are applied at the same time when stopping, but either brake control may be used.