What is a Tssm module?
This Bulletin covers the TSSM (Turn Signal Security Module) reset procedure for 2001 and new non-canbus Harley-Davidson Models (with alarm) which should be completed when the turn signals are flashing rapidly with the Signal Stabilizer installed correctly.
What is a Tssm?
Acronym. Definition. TSSM. Two-Spotted Spider Mite.
What does turn signal module Do Harley?
Turn signal module adds an auxiliary brake light and running light function to your existing turn signals for auxiliary rear lighting.
What is a TSM on a Harley?
The turn signal module (TSM) has two major. functions: ● Control turn signals. ●
How do you test for Tssm?
To diagnose the TSM/TSSM observe the behavior of the turn signals.
- Set Run switch to Run – –
- Turn Ignition key On-Off-On-Off-On-Off-On and then toggle the Left Turn Signal switch twice. – –
- Turn Ignition key Off-On Verify the Check Engine lamp and Security Lamp illuminate briefly and then turn off.
How do I reset my Harley security system?
How to Disable Harley-Davidson Factory Security and Use Transport …
How do I test my Harley Davidson TSM?
What does a turn signal module do?
The Self Canceling Turn Signal Module™ is an electronic flashing relay that is meant to completely replace your existing mechanical flashing relay(s), or be a stand alone flashing relay to vehicles that do not have turn signals. It works with both LEDs or incandescent lights up to 10 amps per output(20 Amps Max).
What is the difference between a TSM and a Tssm?
TSM Is a turn signal module. TSSM is a turn signal security module.
What is a TSM on a motorcycle?
TSM = turn signal module, standard on all bikes.
What is the default Harley security code?
VIDEO-If your Harley Davidson is equipped with a factory installed alarm then you really need to immediately change your security PIN code. Harley puts a standard factory preset PIN code and it is usually 31313.
How do you disarm a Harley-Davidson security system?
Fob: An armed security system is automatically disarmed when the fob is present and the motorcycle is moved or the ignition switch is turned to IGN or ACC. When the system disarms, the optional siren will chirp once and the security indicator lamp will illuminate for a solid four seconds and then turn off.
What is P&A fuse on Harley?
P&A fuse (2): A 15A fuse that protects the circuits of any installed accessories. Battery fuse (3): A 15A fuse that protects all the circuits. If the battery fuse fails while the engine is running, the engine will continue to run and critical circuits like the ABS brakes will continue to function.
How do I know if my multifunction switch is bad?
Usually, a bad or failing combination switch will produce a few symptoms that can alert the driver of a potential problem that needs to be serviced.
- Problems operating the turn signals.
- Problems operating the headlights.
- Problems operating the wipers.
What is the most common cause of turn signal problems?
Answer: The most common problem is a shorted light bulb causing trouble, an electrical short in the signal switch, or bad flasher relay.
How do I get my Harley out of security mode?
How do you override a Harley-Davidson security system?
How to manually override a Harley-Davidson Security Alarm
How do you start a Harley without fob or PIN?
STARTING YOUR HARLEY-DAVIDSON WITHOUT YOUR FOB!
Immediately hold both turn signal indicators until FIVE dashes appear in the odometer gauge. Select the first digit of your PIN (a) by pressing the left turn signal button (a) times. Press the right turn signal switch one time to move to the next digit.
Where are the fuses on a Harley Davidson?
Fuses are located under left side cover.
What does a multi function switch control?
MULTI-FUNCTION COMBINATION SWITCH —- Controls a variety of functions including the hazards, turn signals, blinker, wipers, windshield washer, high beam head lights and cruise control. The multi-function switch mounts to the steering column and includes the necessary wire harness to plug into your vehicle module.
Does body control module control turn signals?
The BCM communicates with other on-board computers via the car’s vehicle bus, and its main application is controlling load drivers – actuating relays that in turn perform actions in the vehicle such as locking the doors, flashing the turn signals (in older cars), or dimming the interior lighting.
How do you know if your turn signal relay is bad?
Turn Signals Don’t Work
This is the most common symptom of a faulty turn signal relay. Once the relay is broken, the lights won’t turn on with the switch. On some vehicles, the hazard lights also rely on the turn signal relay, so those lights might also cease to function.
How do you bypass the security code on a Harley-Davidson?
Harley Key Fob troubleshooting and bypass. Security code – YouTube
Can you disable Harley security system?
In the event of a misplaced or disabled key fob, your Harley-Davidson® Smart Security system can be disarmed by using your five digit, Personal Identification Number (PIN).
How do you start a Sportster without fob?
Harley Sportster WITHOUT Key Fob + Change Security Override Code