What is the difference between an R1 and an R4 tractor tire?
These tires offer excellent traction on harder surfaces such as construction lots and are less aggressive on turf than an R1 tire. An R4 tire is more aggressive than an R3 tire, however, it is less aggressive than an R1 tire. An R4 tread depth is about 70 percent as deep as an R1 tire.
How much do small tractor tires cost?
How much do tractor tires cost? A radial design tractor tire from Titan Tire Corporation has an average retail price of US$1,600 to US$2,900. Some new tires might come cheaper at US$400, but still, it costs a fortune for many. Buying used tractor tires will save you from breaking your bank.
How wide is a 14.9 tractor tire?
14.9 inches wide
Standard Size Expression
An example of tractor tire sizes expressed in the standard format would be “14.9-42”. The “14.9” means the tire is 14.9 inches wide and the “42” tells us that this tire fits a 42-inch diameter wheel.
What does R4 mean on a tire?
Industrial Tire
R4: Industrial Tire
R4 tires, also known as industrial tires, are wide and durable tires designed primarily for use on hard surfaces like pavement and gravel. In terms of tread depth and lug spacing, they fall in between R1 and R3 tires.
What does SS mean on a tractor tire?
The symbol that shows a tires performance level consists of two parts: Tire performance is marked by load index(LI) and speed symbol(SS). LI refers to the maximum weight that one tire can support and SS refers to the maximum speed that a tire can handle. Load Index(LI)
What does R mean on a tractor tire?
– The letter R indicates radial construction. Read more about Radial Traction Solutions and see a Traction Comparison Chart. -15 indicates the rim diameter and means this tire would fit a rim with a 15 inch diameter.
How many years do tractor tires last?
six years
You shouldn’t drive on tires with dry rot because they can break apart while driving. Anything older than six years is at risk for dry rot, but it could happen sooner. Cracks in the sidewall or lower section of the tread are indications it’s time for new tractor tires.
How much does it cost to replace a tractor tire?
Tractor tires can cost anywhere from $1400 to $3000 each. When the sidewall, tread, or lug is damaged, the tractor may be unusable until there’s time and money to replace it.
How do I know if my tractor tire is bias or radial?
A radial tractor tire is designed as a two-part construction allowing the sidewall of the tire to flex independently of the face or tread area of the tire. A bias tractor tire is designed with a single ply wrapped diagonally from one side of the tire to the other.
Are R4 tractor tires good in snow?
R-4 tires are found on so many compact tractors because they provide a good balance of hard- and soft-service performance—however, they’re not the best choice for snow removal.
What does F2 mean on tractor tires?
F2. This is a free-rolling, three-rib steer tire used in general dryland farming. It typically complements a rear R1 tire. F2M. This is a free-rolling, four-rib steer tire used in general dryland farming.
What is the difference between R1 and R2 tractor tires?
Tread depth of R2 tires is approximately twice as deep as R1 tires. R2 tires also have the widest spacing between lugs to allow mud to shed easier. The wide-spaced lugs can show extra wear and cause problems with vibration when roading.
How often should you change tractor tires?
You shouldn’t drive on tires with dry rot because they can break apart while driving. Anything older than six years is at risk for dry rot, but it could happen sooner. Cracks in the sidewall or lower section of the tread are indications it’s time for new tractor tires.
How many miles can you get on a tractor trailer tire?
All the turning and engine power they’re subjected to means they usually have to be replaced around 150,000 miles, which is anywhere from a year to a year-and-a-half of operation. Drive tires can last longer, 350,000 to 500,000 miles, because they don’t deal with all the turning stress.
How much does a huge tractor tire cost?
One of the many unique aspects of the Cat 797 are its tires: More than 13-feet-tall, weighing 11,860 pounds, each Michelin or Bridgestone 59/80R63 XDR tire costs $42,500 and that’s when you buy the full set of six required by each $5.5 million truck.
Which is better radial or bias tires?
Radial tires dissipate heat better than bias-ply tires, which allows them to travel at higher speeds for greater distance. “Due to a rigid tread, single steel body ply construction and the absence of multiple nylon plies, radials are much more effective at reducing heat,” says Mills.
What is the difference between Ag tires and industrial tires?
Industrial Tires (R-4)
They are an all purpose tire that has more aggressive tread than a turf tire but less so than an ag tire. If the tractor operator is careful, an R4 tire will not tear up dry lawns and surfaces and distributes the weight a bit more evenly than an ag tire.
Are industrial tractor tires good for snow?
Tire for Industrial
It features excellent traction and is ideal for ice and snow operations.
Why are tractor tires so expensive?
There have been many complications getting the raw materials needed to produce tires because of restrictions imposed during and after the shutdowns from the pandemic. Rubber and other raw material prices continue to increase month over month.
How often do semi truck tires need to be replaced?
every three to six years
Most experts agree that semi-truck tire replacement should occur every three to six years. If your tires were purchased more than six years ago, it’s probably a good idea to start looking at replacement tires for your fleet.
How often should semi truck tires be rotated?
every 5,000 to 7,500 miles
A tire rotation is typically performed every 5,000 to 7,500 miles. Remember that while this is a good rule to follow, you’ll find the exact figures on when to rotate tires in your used truck’s owner’s manual. Our guide helps Logan drivers know when to have a tire rotation done.
How much does a CAT 797 tire cost?
$42,500
Cost of huge tires – Cat 797 is Caterpillar’s off-highway, two-axle, mechanical powertrain haul truck. It uses massive 13-feet-tall tires that weigh 11,860 pounds. Each tire, made by either Bridgestone or Michelin, costs $42,500. A full set requires six tires that cost $5.5 million.
What ply tire is best for a tractor?
You’ll need at least a 10-ply tire, which corresponds to an E rating. An F rating is a 12-ply tire, etc. However, as a general rule, we prefer to steer customers away from bias ply tires for loader applications. They deliver a punishing ride and will generally wear a lot faster than radials.
Why are tractor tires hard to find?
Many farm tires have been hard to find over the past year or so due to supply chain constraints at every level, from sourcing raw materials to shipping finished tires to dealers. Supply chain challenges have also contributed to high raw material prices, which have been a major factor in driving up tire costs.
How old can tires be on a semi?
Experts recommend replacing your tires in sets, as sets with uneven treads can cause your truck to ride more roughly. You should never keep tires on your truck for longer than six years, though the average lifespan of a semi-truck tire is anywhere from three to six years if they remain in good condition.