What is the difference between cetol 1 and cetol 23?

What is the difference between cetol 1 and cetol 23?

Cetol 1 is a premium, translucent exterior wood basecoat to be used with Cetol 23 Plus. Its superior oil alkyd formulation offers excellent penetration and adhesion to vertical wood surfaces. Cetol 23 Plus is a premium, translucent topcoat for Cetol 1.

What is Sikkens called now?

Sikkens PROLUXE™

CRANBERRY TOWNSHIP, Pa., March 12, 2015 – A brand with more than 200 years of heritage and quality, SIKKENS® wood finishes, is changing its name. A premium exterior wood finishes brand for decks, logs and siding, doors, windows and interior finishes, the Sikkens brand is becoming the Sikkens PROLUXE™ brand.

Is Sikkens toxic?

HARMFUL IF SWALLOWED. CAUSES RESPIRATORY TRACT IRRITATION. MAY BE HARMFUL IF ABSORBED THROUGH SKIN.

Is Sikkens cetol oil based?

Sikkens Proluxe Cetol SRD is a one coat, oil-based, transparent exterior wood finish. Sikkens Proluxe Cetol SRD was created for use on a variety of wood surfaces including siding, rails, decks, and logs. Available in a curated palette of eight wood tones.

Is Sikkens a paint or a stain?

A high quality, solvent-based wood stain for interior and exterior joinery.

How long does cetol 1 take to dry?

It is recommended to perform a 3-coat colour and sheen test on a sample of the wood. Since outdoor furniture and fences are considered to be in a high moisture environment, it is recommended to apply 3 coats of Cetol 1RE, allowing a minimum of 24 hours dry time between coats.

What happened to Sikkens?

Over time, the Sikkens name grew smaller, while the ProLuxe name grew larger. Now the Sikkens branding has been dropped from the label altogether and replaced entirely with “PPG ProLuxe.” Per their purchase agreement, PPG has now dropped all additional Akzo Nobel trademarked names.

How long does Sikkens last?

Sikkens states in their literature that you should expect to get 2-4 years life out of their system on a sunny side of a house, and 3-5 years on a shady side.

Can you use sikkens inside?

Sikkens does not recommend the use of any exterior products for interior use. If it is already applied, we recommend top coating the Cetol 1 with two coats of Cetol Interior Clear or Cetol BL Interior Clear to seal the surface. 10.

Is cetol a polyurethane?

Cetol® BL is a waterborne, urethane-fortified transparent satin finish, which enhances the natural beauty of the wood grain, while providing a hard wearing and scratch resistant film to protect most interior wood surfaces. Ready for use and easy to apply. Dries quickly and has very little odour.

Is Sikkens a polyurethane?

Sikkens Cetol TFF
Extremely durable quick drying water based clear urethane varnish for all interior timber and parquetry floors with a satin finish.

Is Sikkens a varnish?

A medium build, solvent-borne interior varnish that is resistant to knocks, spills and abrasion. A highly durable, high build, solvent-borne opaque that provides a satin paint-like finish on exterior surfaces.

Do I need to sand between coats of Sikkens?

Sikkens Cetol Deck Slip Resistant
Do not sand between coats. Always apply coatings along the grain and never across.

Do they still make Sikkens?

Now the Sikkens branding has been dropped from the label altogether and replaced entirely with “PPG ProLuxe.” Per their purchase agreement, PPG has now dropped all additional Akzo Nobel trademarked names.

Who manufactures Sikkens?

AkzoNobel
Sikkens is part of AkzoNobel, the largest global paint and coatings company and a major producer of specialty chemicals.

What is the difference between cetol and varnish?

Varnish will go over a thin coat of Cetol but not the other way around. Varnish is much harder and more abrasion resistant. For a really good Cetol job, all the same prep work as required for varnish is needed.

Is sikkens a paint or a stain?

Who bought Sikkens?

A series of mergers and takeovers in the 1960s put us at the forefront of the international market. These days Sikkens forms part of the AkzoNobel group, the largest paint and coatings company in the world. We are dedicated to ensuring Sikkens products achieve top results for our customers.

Which Sikkens product to use first?

On new work and when any bare timber is exposed, a base stain of Cetol HLS plus should always be applied first. It is important to satisfy the absorption of the timber; the best way to do this is to apply the HLS plus quite liberally and then redistribute any excess after about 5 minutes with a virtually dry brush. 3.

Is cetol better than varnish?

Where is Sikkens from?

Amsterdam, the Netherlands
Headquartered in Amsterdam, the Netherlands, AkzoNobel is a Global Fortune 500 company and is consistently ranked as one of the leaders in the area of sustainability. With operations in more than 80 countries, our 55,000 people around the world are committed to excellence and delivering Tomorrow’s Answers Today™.

Is sikkens cetol oil or water based?

Sikkens Cetol HLSe is the ultimate timber coating all-rounder. A premium, oil-based, deeply penetrating and highly transparent timber stain for exterior use on decks, cladding, screening, timber joinery and furniture.

Should you sand between coats of Sikkens?

GENERAL ADVICE: Do not sand between coats. Always apply coatings along the grain and never across.

Is sikkens a polyurethane?

How long does sikkens last?

Is Sikkens cetol a stain?

Cetol Semi-Transparent SRD. Cetol SRD Semi-Transparent Stain is a one-coat, exterior wood stain for use on a variety of exterior wood surfaces.

Available in a wide-range of stain colours, and translucent, semi-translucent and solid finishes, there is a Sikkens wood stain and finish to beautify your decks, log walls, wooden siding, doors and window trim.

How long will Sikkens stain last?

Is Sikkens cetol 1 oil based?

Sikkens Proluxe Cetol SRD is a one coat, oil-based, transparent exterior wood finish. Sikkens Proluxe Cetol SRD was created for use on a variety of wood surfaces including siding, rails, decks, and logs.

Is Sikkens oil or water based?

Sikkens Cetol BLX-Pro is a quick drying water based exterior timber finish that is ideal for decks and outdoor furniture providing good durability and flexibility.

Is cetol a varnish?

Cetol was one of the first, faux varnishes.

Is Cetol better than varnish?

Is Cetol a sealer?

Sikkens ProLuxe Cetol Log & Siding is a wood stain and sealant that provides prestige, performance and perfection in every bucket.

Is Sikkens Cetol 1 oil based?

Is Cetol a polyurethane?

Related Post