What is the equivalent to a 13/16 wrench?

What is the equivalent to a 13/16 wrench?

Metric / Standard Wrench Conversion Chart

What is a 13/16 wrench in metric?

Convert between US Inches and metric mm wrench and spanner sizes.

Is 17mm same as 13 16?

14mm = almost 9/16 inch. 15mm = almost 19/32 inch. 16mm = 5/8 inch. 17mm = almost 11/16 inch.

What size is a 13/16 socket in MM?

Standard / Metric Wrench Conversion Chart

How do you convert SAE to metric?

How to Convert SAE to Metric

1. Step One: Convert the Fraction to Decimal. The first step is to convert the inch fraction to a decimal.
2. Step Two: Convert to Millimeters. The next step is to multiply the inch decimal by 25.4 to convert it to millimeters.

What SAE and metric sizes are the same?

Can you use Metric sockets on SAE fasteners or SAE Sockets on Metric Fasteners? Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.

How do you convert standard tires to metric?

How to Convert a Tire Size From Metric to Inches

1. section width = 225 ÷ 25.4. section width = 8.86″
2. sidewall = 8.86″ × (60 ÷ 100) sidewall = 8.86″ × 0.6. sidewall = 5.316″
3. diameter = (5.316″ × 2) + 16″ diameter = 10.632″ + 16″ diameter = 26.632″

What does 17mm convert to in standard?

SAE to Metric Conversion Chart

What is a 17mm socket in standard?

Drive Tang Size : 3/8 in. Socket Size (mm) : 17mm. Length Format : Standard.

Are 10mm and 3/8 the same?

3/8″ is an imperial measurement, which is pretty much the equivalent to 10mm.

What metric and SAE sizes are the same?

Are SAE & Metric Interchangeable? Can you use Metric sockets on SAE fasteners or SAE Sockets on Metric Fasteners? Yes, you can use some sockets on both metric and SAE sizes.

What’s the difference between SAE and metric?

While the majority of bolt-type fasteners used in the United States conform to one or the other measurement scale, the difference between SAE and metric fasteners (and their corresponding sockets) is as profound as the difference between yards and meters: They are almost the same, but not quite.

Do you need both SAE and metric?

Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.

What is a 265 75R16 equivalent to?

265/75R16 Conversion

When converted to inches, 265/75R16 is equivalent to 31.7×10. 4R16. 265/75R16 tire has a section width of 10.4 inches which is the measurement of tire’s width from its inner sidewall to its outer sidewall. Rim diameter of 16 inches represents the size of the wheel the tire can be mounted on.

What size tire is a 265 70R16?

What is 265/70R16 in inches?

What size wrench is 17mm?

SAE to Metric Conversion Chart

Is 13mm the same as 1 2 inch?

Our conversion for 1/2″ is 13mm = 1/2″. 13mm is closest to 1/2″. This is the size we have found customers who say they have 1/2″ plugs are happy when they purchase 13mm.

Why is there no 16MM wrench?

1911, is there a reason they don’t use any 16MM nuts or bolts? 16mm and 18mm nuts / bolts are most commonly found on American vehicles that converted to metric hardware, and not import vehicles designed with metric hardware. So, you don’t find them in most basic wrench / socket sets.

Will a M10 bolt fit a 3/8 hole?

That said, they are very close, the 3/8″ bolt is about 0.019″ smaller and the pitch’s are very close so the 3/8 -16 bolt will thread in the 10mm x 1.5 but the 10 x 1.5 bolt will not fit the 3/8 but..

Is M10 a 10mm bolt?

Steel bolt with M10 metric thread. Metric threads are designated with a capital M plus an indication to their nominal outer diameter and their pitch: This bolt is M10 x 1.5 – which means the outside diameter is 10mm and the threads are 1.5mm apart (the most common thread pitch for M10).

Can you use metric on SAE?

Do cars use SAE anymore?

Improvised repairs: Hardware stores still mostly sell SAE, so many improvised repairs will involve SAE nuts and bolts that you may have to deal with. Also, many aftermarket battery terminals are still SAE.

What is a 285 75R16 equivalent to?

When we convert 285/75R16 to inches, it is equivalent to 32.8×11.

What size is 245 70R16?

245/70R16 tires are 29.5″ tall, have a section width of 9.6″, and fit wheels with a diameter of 16. The circumference is 92.6″ that translates into 684 revolutions per mile.

What size is 275 70R16?

275/70R16 tires have a diameter of 31.2″, a section width of 10.8″, and a wheel diameter of 16″. The circumference is 97.8″ and they have 648 revolutions per mile. Generally they are approved to be mounted on 7-9″ wide wheels for passenger tires and 7-8.5″ for LT tires.