What PSI should drag radials be?

What PSI should drag radials be?

ET DRAG AND ET STREET R (Bias)

What is the largest drag radial?

Mickey Thompson is well-regarded as the innovator of drag radial race tires, and the new 31-inch ET Street S/S is one of the world’s largest. The ET Street S/S radial pairs well with Mickey Thompson’s Sportsman S/R skinny front radial tires for drag race applications.

What size is a 315 radial tire?

The 315/35R17 Nitto NT05R Drag Radial has a diameter of 25.71″, a width of 12.48″, mounts on a 17″ rim and has 809 revolutions per mile. It weighs 29.9 lbs, has a max load of 1433 lbs, a maximum air pressure of 44 psi, a tread depth of 6.3/32″ and should be used on a rim width of 10.5-12.5″.

How do you choose a drag radial?

Ultimately, your drag radial choices come down to how you drive your car, the climate you live in, and how much of a budget you’re willing to dedicate to replacing worn out rubber over the course of a season.

How long do drag radials last?

Owners of drag racing cars estimate that they get anywhere from 15,000-30,000 miles on their street drag radials. Street drag radials are constructed differently than typical tires. They have a slightly smaller sidewall width and thinner tread. This helps them achieve higher speeds while maintaining a smooth ride.

Are drag radials better than slicks?

A true slick is usually bias ply and it cords form as x pattern all the way around the tire. A radial’s cords go directly from one side of the bead to the other. As far as drag racing goes, the radial will help keep you more stable while a slick will allow you to launch much harder.

What drag radials last the longest?

With its 100 treadwear and improved water channels, The NT555R can live for around 10,000 miles and combat wet weather situation; it is the longest lasting drag radial in this article.

Who makes a 20 inch drag radial?

Nitto Tires

Last winter, Nitto Tires unveiled its NT555R 20-inch drag radial tires to its extensive line up, the first of its kind in the drag radial niche.

How wide is a 275 Drag Radial?

The 275/60R15 Mickey Thompson ET Street Radial Pro has a diameter of 28.2″, a width of 11.4″, mounts on a 15″ rim and has 737 revolutions per mile. It weighs 32 lbs and should be used on a rim width of 7.5-9.5″.

What sizes do drag radials come in?

18 INCH

Do drag radials make your car faster?

Radials have less rolling resistance, allowing them to be quicker and faster relative to the ET Drag. Drivers report a more stable feel at the top end of the track because of the radial design and because they work with more air pressure than a bias-ply tire.

Is it safe to drive on drag radials?

DOT Drag Radials are not all cut from the same cloth. Some are designed to barely meet the DOT standards and are not for street use (Hoosier), but tires like the Mickey Thompson ET Street Radials are safe for street use, as long as the pavement is dry.

Are wider tires better for drag racing?

“Bigger tires do not automatically provide better grip — if you change to a larger tire, you must also select a softer compound to assure better traction”. Bickel also points out that you should never select a bigger tire just because it looks like it will work better.

Do drag radials wrinkle?

Radial Tire Air Pressure: Tech Tip Tuesday – YouTube

How many years are drag radials good for?

When we asked about the life expectancy of drag radials, Robinson’s reply was, “Would that be the first or the third set?” On average, a set of drag radials with a mix of track time and highway miles is between 3,000 and 5,000 miles.

When should you change drag radials?

Usually when the 60’s start falling off it’s time to replace the tires. This will happen between 90 and 120 runs.

Are Nitto 555 g2 drag radials?

The Nitto NT555RII is the next generation in performance. Nitto delivers a DOT compliant competition drag radial race compound with high grip and flexibility.

Are drag radials street legal?

To be approved for street use, a tire must meet specific standards like hydroplane resistance, tread depth, and sidewall stiffness. The bare minimum tread depth is 2/32nds for street use; most drag radials are in the 5/32nds range whereas a true street tire is 10/32nds.

What’s better slicks or drag radials?

How many miles do drag radials last?

How long are drag radials good for?

What is the best tire pressure for drag racing?

“For drag radial tires, such as our M&H Racemaster, you should never run below 24 psi on the street, and keep pressures above 15 psi at the track. The normal range of pressures, depending on the vehicle’s weight and suspension setup is 15-20 psi.” Weight is the biggest factor.

What is a good 60 foot time in drag racing?

around 2 seconds
Most street-tired cars have 60 foot times around 2 seconds. The 660 foot mark is the halfway point of a quarter-mile track.

How long do Nitto nt555 r2 last?

And with a 100 treadwear rating (UTQG), a rating that outperforms the NT05R (00), the NT555RII is a drag radial with considerable tread longevity built into it. It may even last 10,000 miles or more, just as the NT555R tends to do.

Do drag radials make you faster?

Radials have less rolling resistance, allowing them to be quicker and faster relative to the ET Drag. Drivers report a more stable feel at the top end of the track because of the radial design and because they work with more air pressure than a bias-ply tire. Radials are also a little easier to manage.