Do Fender Strats have a compound radius?

Do Fender Strats have a compound radius?

Fingerboard Radius: 9.5″-14″ Compound Radius (241 mm-355.6 mm)

What fretboard radius did Jimi Hendrix use?

9.5″

The maple neck on the Jimi Hendrix Stratocaster carries a modern fretboard radius of 9.5″. This flatter design allows for much wider string bends than a vintage fretboard.

When did Fender switch to 9.5 radius?

1980s
Today, most Fender electric instruments use one of two main fingerboard radius measurements. Most prevalent is the modern 9.5” radius (241mm), which was adopted in the 1980s and is now found on about two thirds of Fender electric instruments.

What is the neck radius of a Fender Stratocaster?

For example, original Stratocasters have a 7.25″ radius (184.15mm), which is very curvy. It makes chording easier (especially barre chords), but if your string height is low there’s a risk of notes ‘choking out’ on higher frets if you bend them too far.

Which Fender guitars have a compound radius?

One of the most talked-about features of the Fender American Elite series is the neck, which has a 9.5”-14” compound-radius fingerboard and blends perfectly into a comfortable asymmetrical neck heel.

Is compound radius neck better?

A compound radius neck is a neck that has one radius at the nut and a different, larger radius at the heel of the neck. This is meant to give a better playing experience for both rhythm playing towards the nut side of the fretboard, and soloing towards the heel side.

Which neck radius is easiest?

The Quick Answer. Guitar necks with a 9.5″ fingerboard radius make it easier for most players to hold chords compared to necks with a 12″ radius. However, a 12″ radius will make it easier to bend the strings and means the guitar can have a lower action without causing fret buzz compared to a 9.5″ radius.

Which guitar neck radius is easiest?

There are different sizes of nack radius for different guitars, however, a 9.5 to 12-inch neck radius is best for small hands. With these radius sizes, guitars are easy to hold and play.

What neck radius does Eric Clapton use?

Specs

Is a 12 radius neck good?

Having a larger 12″ radius means the fretboard feels flatter and makes it more suitable for bending the strings. You’ll often see that lead players like to use a flatter fretboard (larger radius) because it feels better for solos (which often require bending) and moving around the fretboard more quickly.

What guitars have 12 inch radius?

What guitars have a 12 inch radius?

What fretboard radius is best for small hands?

People with small hands tend to have an easier time playing on flatter, thinner necks, which means that they will often benefit from a fretboard radius that is 12“ or above.

Does fretboard radius really matter?

Other common sizes for fretboard radius are 9.5″, 10″, and 12″. The higher the number, the flatter the fingerboard. From a guitarist’s viewpoint, fingerboard radius has to do with feel and playability and is completely subjective; no radius is better or worse.

Which Stratocaster neck is best?

4 Best Stratocater Replacement Necks

• Fender Roasted Maple Flat Oval Neck.
• Fender Modern C Maple Neck.
• Fender American ’60s Original Neck.
• Fender American Professional Neck.

Which Fender neck is best for small hands?

Small hands: C or flat C shaped necks
Generally the shallower the profile the better e.g. C or flat C, provided it is in combination with a thin fretboard. One of the challenges of playing guitar with small hands is the ability to span frets.

How wide are Fender necks?

1-11/16″ (43mm) – Modern Medium
This is the standard nut width. It is our most popular nut width size, and the closest to modern Fender® necks.

Are all Fender necks the same?

Fender necks known to be interchangeable
Within Fender guitars, we can state that some necks are interchangeable for sure. Necks from the same guitar model are for sure replaceable if they share the scale, the number of frets, and bolts.

How do you measure the radius of a guitar neck?

How to measure the fretboard radius

1. Find the guitar radius gauge that matches the arc (or radius) of your neck.
2. Use a ruler graduated in 32nds or 64ths of an inch to measure the height of the top and bottom E strings.
3. Set the gauge on top of the strings next to the bridge.