How much does a Ditch Witch trailer weigh?
Featuring durable, high-strength axles and full-width wooden or steel decks, Ditch Witch single-axle trailers not only haul the weight—from 3/4 ton to nearly three tons—but they do it in style, with tons of standard features including a complete lighting system.
What is a Ditch Witch trailer?
Featuring a durable, high-strength axle and a steel deck, the Ditch Witch S2B single-axle trailer is designed specifically for our walk-behind trenchers. Standard features include ramps for easy loading and unloading, tie-down points, tongue safety chain, and a complete lighting system.
How much does a Ditch Witch 410 weight?
3,910 lbs.
Specifications
| Dimensions | |
|---|---|
| Length | 118 in. (3 m) without plow & trencher151 in. (3.8 m) with plow only |
| Height | 63.5 in. (1.61 m) max. |
| Width | 56 in. (1.42 m) max. |
| Weight | 3,910 lbs. (1,773 kg) basic unit with 18 in. blade & 36 in. chain |
What are Ditch Witch used for?
It was designed primarily for digging the trenches needed to connect a house’s plumbing system to the main at the street. A landscape contractor from Long Island, New York named Alex Baker purchased the first one and immediately put it to use in digging trenches for sprinkler systems.
How deep does Ditch Witch dig?
Size. Smaller models can often dig trenches between 1 and 4 feet deep and between 4 and 16 inches wide. Larger trenchers can dig ditches up to 18 feet deep and 4 feet wide.
Does a Ditch Witch take gas or diesel?
Ditch Witch’s RT45 Ride-On Trencher Utilizes Diesel
Designed for minimal maintenance and maximum operator productivity, the Ditch Witch RT45 ride-on trencher features a Tier 4, 49-hp Deutz diesel engine.
Where is the VIN on a Ditch Witch?
The VIN is located on the vehicle. For cars and trucks it is located here: On the driver’s side dashboard ( viewable through the windshield ) On the driver’s side door ( on a sticker in the door jamp )
How much does a Ditch Witch 410sx weight?
3310 lb
Specs
| Engine | Gross power @ 3600 rpm, Fuel: Diesel |
|---|---|
| Pump Pressure | Charge pump, 25 psi, Ground drive pump @ 2500 rpm |
| Thrust | Vehicle speeds @ 2500 rpm |
| Weight | 3310 lb |
| Width | 44.5 in |
What kind of hydraulic fluid does a Ditch Witch use?
Oils Suitable For Ditch Witch Include: Hydraulic Oil 10w – 15w/40 Engine Oil – 80w/90 Differential Oil – 80w/90 Gearbox Oil – Transmission Fluid Oil – Red Antifreeze Long life.
Who owns Ditch Witch?
The Charles Machine Works IncThe Toro Company
Ditch Witch/Parent organizations
How deep can you dig with a Ditch Witch?
Will a Ditch Witch cut through tree roots?
Avoid using a trencher to cut through large tree roots if possible since larger roots increase the likelihood of problems with the cut. Although a trencher can be used to cut through roots, it was designed for creating trenches in soil and may not be able to handle large roots.
How long does it take to trench 100 feet with a trencher?
The short answer is a good working trencher of 100 linear feet will take roughly 12 hours to dig. You can calculate the work period by multiplying the linear feet you need to dig by 0.12. However, how fast you finish depends largely on the trencher power and the soil environment.
How many gallons does a Ditch Witch hold?
The HX30 is equipped with a 500-gal (1893-L) or 800-gal (3028-L) debris tank for any size cleanup job. The machine can be configured to accommodate operator controls on either the left or the right side to meet each contractor’s individual needs.
How do you start a Ditch Witch?
Trenching With the Ditch Witch® C16X and C24X – YouTube
How do you check hydraulic oil on a glass?
Step 1: Checking the Sight Glass
You want to lift the hatch to check the hydraulic oil. When the hatch is lifted, make sure the safety is engaged so the hatch does not fall back down. On the left side, there will be a small sight glass with a little red ball inside. The red ball floats in the hydraulic oil.
How do you check hydraulic oil level?
The proper hydraulic fluid level is important to the hydraulics system in your Geoprobe® machine. Check the hydraulic fluid level by looking at the sight glass on the side of the hydraulic tank (a Geoprobe® Model 54LT is shown), or on some units, by checking the dipstick on the hydraulic cap.
How much did Ditch Witch sell for?
$700 million
The Perry-based parent company of Ditch Witch was sold to Toro for $700 million in cash. The parent company of Ditch Witch, a Perry-based manufacturer of underground construction machines, has been sold to Toro Company.
Did Toro buy out Ditch Witch?
–(BUSINESS WIRE)–Apr. 1, 2019– The Toro Company (NYSE: TTC) today announced that it has successfully completed its acquisition of privately held The Charles Machine Works, Inc. , an Oklahoma corporation and the parent company of Ditch Witch and other leading brands in the underground construction market.
Can a Ditch Witch cut through tree roots?
How deep will a Ditch Witch dig?
How long does it take to trench 100 feet?
Will a walk-behind trencher cut through tree roots?
Severing roots: Landscapers, lawn care professionals and lot clearing operations can use trenchers to cut plant and tree roots.
How far can you trench in a day?
Trencher Production
“Our customers look to dig 1 to 2 miles of trench per day,” says Kevin Shimp, president of Port Industries, a trencher manufacturer in Palmyra, MO. “That’s one trench with one operator, opening up 10,000 feet of trench per day, whereas one excavator can open up 1,000 to 1,500 feet per day.
How heavy is a Ditch Witch?
RT55 Ride-On Trencher
| U.S | Metric | |
|---|---|---|
| Length, nose to rear mount | 114 in | 2.9 m |
| Length, transport | 128 in | 3.25 m |
| Basic unit weight | 5,610 lb | 2545 kg |
| Front counterweight | 1,915 lb | 869 kg |